中文  |  English
TOP
+86-021-69755076
Current position:Home >> Products >> Butterfly valve >> Pneumatic interfacing fluorine butterfly valve

Pneumatic interfacing fluorine butterfly valve

Product Model:D671F4-10C
Nominal Diameter:DN50~1000mm
Nominal Pressure:0.6~1.6MPa
Body Material : Ductile cast steel, cast steel, stainless steel +F46
Applicable temperature: -30~+70°C
Applicable medium: all kinds of strong corrosion Medium


I. Pneumatic lining fluorine butterfly valve products

       Pneumatic lining fluorine butterfly valve adopts PTFE lined lining plate with spherical sealing surface. Pneumatic lining fluorine butterfly valve is easy to operate, with tight sealing performance and long service life; it can be used for quick cutting or adjusting flow. Pneumatic-lined PTFE butterfly valves are suitable for applications where reliable sealing and good adjustment characteristics are required. The valve body adopts split type, and the seal of the two ends of the valve shaft is controlled by the rotating base surface between the butterfly plate and the valve seat and the fluoro rubber; and the valve shaft is not in contact with the fluid medium in the cavity. Pneumatic lining PTFE butterfly valves are widely used in the transportation of liquids and gases (including steam) in various types of industrial pipelines. There are occasions where severe corrosive media are used, such as: sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, alkali, and king Water and other highly corrosive media.
 
       Fully lined with PTFE (F4), polychlorotrifluoroethylene (F3) and polyfluorinated ethylene propylene (F46) fluorine plastic lining butterfly valves, with corrosion resistance, no leakage, long life and other advantages. Lined PTFE pneumatic butterfly valve is suitable for concentrated sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, aqua regia, various organic acids, strong acids, oxidizing medium or high-temperature olefinic sulfuric acid, high temperature concentrated acetic acid, alternating acid and alkali and various organic solvents and other Strong corrosive media.
 
 Pneumatic Fluorine Butterfly Valve main features:
 1, small and lightweight, easy to disassemble and repair, and can be installed in any position.
 2, the structure is simple, compact, 90 ° turn quickly open.
 3, the operating torque is small, effortless and light.
 4. The flow characteristics tend to be linear and the regulation performance is good.
 5, sealing material, anti-aging, corrosion resistance, applicable to a variety of media.
 

Second, the main technical parameters of pneumatic lined fluorine butterfly valve

1, valve body

Body form Straight cast butterfly valve
Nominal diameter DN50~1000mm
Nominal pressure PN1.0, 1.6 MPa
Flange standard JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG20594-97, HG20618-97, etc.
Connection Type Flange, clip type
Valve cover form One-piece
Capping type Gland compression type
Seal packing V-type PTFE packing, flexible graphite packing


 2, valve trim

Valve plate form Vertical plate (butterfly)
Flow characteristics Linear


 3, the executing agency

Actuator model GT Series, SR Series, AT Series, AW Series Single and Double Acting Pneumatic Actuators
Supply pressure 400~700KPa
Air interface G1/4"、G1/8"、G3/8"、G1/2"
环境温度 -30~+70℃
作用形式 单作用执行机构:气关式(B)--失气时阀位开(FO);气开式(K)--失气时阀位关(FC)
       双作用执行机构:气关式(B)--失气时阀位保持(FL);气开式(K)-- 失气时阀位保持(FL)
可配附件 定位器、电磁阀、空气过滤减压器、保位阀、行程开关、阀位传送器、手轮机构等


 三、气动衬氟蝶阀主要性能指标

公称通径 DN(mm) 50~1600
公称压力 PN(MPa) 0.6 1.0 1.6
试验压力 强度试验 0.9 1.5 2.4
密封试验 0.66 1.1 1.76
气密封试验 0.6 0.6 0.6
适用介质 各类强腐蚀性介质


 四、气动衬氟蝶阀零件材料

零件名称 材料
阀体 (球墨铸钢、铸钢、不锈钢)+F46
蝶板 (灰铸铁、球墨铸钢、铸钢、不锈钢及特殊材料)+F46
阀杆 2Cr13、不锈钢
填料 O型圈、柔性石墨

 

图片.png

外形连接尺寸

公称通径 DN(mm) 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000
L 90 90 100 115 130 140 150 250 270 290 310 330 350 390 430 470 500 550
L1 43 46 49 56 64 70 71 76 83 92 102 113 127 154 165 190 203 216
H 法兰式 63 70 83 105 115 137 164 206 230 248 289 320 343 413 478 525 585 640
对夹式 63 70 83 105 115 137 164 206 230 248 289 320 343 413 478 525 585 640
n-φd 4-18 4-18 8-18 8-18 8-18 8-22 12-22 12-26 12-26 16-26 16-30 20-30 20-33 20-36 24-36 24-39 28-39 28-42
H1 根据所配执行机构而定
A 根据阀门所需力矩而定,配置机型不同,外形尺寸也不相同
D 165 185 200 220 250 285 340 405 460 520 580 640 715 840 910 1025 1125 1255
D1 125 145 160 180 210 240 295 355 410 470 525 585 650 770 840 950 1050 1170

Note: The dimensions in the table are without standard attachment data. In addition, due to possible changes in product innovation technology innovation parameters, please consult the company's technical department for the latest data.

 

The previous:Pneumatic PTFE valve
Group address:No.342, Hesheng Yutingyuan, Xiangju Road, Qingpu District, Shanghai

Hotline:+86-21-69755076   59755666   69755027   69755026   57339828
Investment call: +86-15021631111
Fax:+86-21-69755075     E-mail:sales@sgfm.cn
Factory address:No. 1798, Wang Wei East Road Fengjing Development Zone Jinshan District Shanghai City
Copyright © Shen Gao Valve Group Co., Ltd.        www.shengao-valve.com
HuICP No. 14017677    No.31011802002466    Technical support:Fengsheng technology
Group address:No.342, Hesheng Yutingyuan, Xiangju Road, Qingpu District, Shanghai
Hotline:+86-21-69755076   59755666
     +86-21-69755027   69755026   57339828
Investment call: +86-15021631111
Fax:+86-21-69755075   E-mail:sales@sgfm.cn
Factory address:No. 1798, Wang Wei East Road Fengjing Development Zone Jinshan District Shanghai City
Copyright © Shen Gao Valve Group Co., Ltd.
www.shengao-valve.com
HuICP No. 14017677
No.31011802002466
Technical support:Fengsheng technology